hp2420的打印機報錯49.460e，還有49.2****后邊的英文是service error.？
更新時間：2024/9/3 2:30:54,view:469hphp2420蘇州hp打印機售后服務中心客服熱線69616769，蘇州hp售后電話，hp售后網點， HP2420出57·03錯誤。有高手解答嗎？, HP2420D打印文字有重影, HP2420開機打印引擎測試頁, hp2420d不停的打測試頁,維修視頻
hp2420 打印機報錯49.460e，還有49.2****后邊的英文是service error.？
hp常見故障問題解答 2012-1-10 14:44:20
49.460e service error
49.2f9d
49.4cxx
跟定影應該沒什么關系，跟接口板有關. 但也用不著換接口板啊!
檢查一下 內存 cf卡 網卡
hp2420 我 2017-9-5 1:22:00 hp2420故障代碼表
hp2420 小馬 2017-9-6 21:42:46 49.XXXX PRINTER ERROR
To continue turn off then on
No error message will be in event log.
A critical firmware error has occurred that caused the processor on the formatter to abort operation. This type of error can be caused by invalid print commands, corrupt data, or invalid operations. In some cases, electrical noise in the cable can corrupt data during transmission to the printer. Other causes include poor quality parallel cables, poor connections, or homegrown applications. On rare
occasions, the formatter is at fault, which is usually indicated by a 79 Service Error.
1. Press CANCEL JOB to clear the print job from the printer memory.
2. Turn the printer off and then back on.
3. Try printing a job from a different software application. If the job prints, go back to
the first application and try printing a different file. If the message appears only with a certain software application or print job, contact the software vendor for assistance.
4. If the message persists with different software applications and print jobs, disconnect all cables to the printer that connect it to the network or PC.
5. Turn the printer off.
6. Remove all memory DIMMs or third-party DIMMs from the printer. (Do not remove the firmware DIMM in slot J1.)
7. Remove all EIO devices from the printer.
8. Turn the printer on.
9. If the error no longer exists, install each DIMM and EIO device one at a time, making sure to turn the printer off and back on as you install each
device.
10. Replace a DIMM or EIO device if you determine that it causes the error.
11. Remember to reconnect all cables that connect the printer to the network or computer.
12. If the error persists, replace the firmware DIMM.
13. Replace the formatter and calibrate the printer. See Calibrate now.
hp常見故障問題解答 2012-1-10 14:44:20 49.460e service error
49.2f9d
49.4cxx
跟定影應該沒什么關系，跟接口板有關. 但也用不著換接口板啊!
檢查一下 內存 cf卡 網卡
hp2420 我 2017-9-5 1:22:00 hp2420故障代碼表 hp2420 小馬 2017-9-6 21:42:46 49.XXXX PRINTER ERRORTo continue turn off then on
No error message will be in event log.
A critical firmware error has occurred that caused the processor on the formatter to abort operation. This type of error can be caused by invalid print commands, corrupt data, or invalid operations. In some cases, electrical noise in the cable can corrupt data during transmission to the printer. Other causes include poor quality parallel cables, poor connections, or homegrown applications. On rare
occasions, the formatter is at fault, which is usually indicated by a 79 Service Error.
1. Press CANCEL JOB to clear the print job from the printer memory.
2. Turn the printer off and then back on.
3. Try printing a job from a different software application. If the job prints, go back to
the first application and try printing a different file. If the message appears only with a certain software application or print job, contact the software vendor for assistance.
4. If the message persists with different software applications and print jobs, disconnect all cables to the printer that connect it to the network or PC.
5. Turn the printer off.
6. Remove all memory DIMMs or third-party DIMMs from the printer. (Do not remove the firmware DIMM in slot J1.)
7. Remove all EIO devices from the printer.
8. Turn the printer on.
9. If the error no longer exists, install each DIMM and EIO device one at a time, making sure to turn the printer off and back on as you install each
device.
10. Replace a DIMM or EIO device if you determine that it causes the error.
11. Remember to reconnect all cables that connect the printer to the network or computer.
12. If the error persists, replace the firmware DIMM.
13. Replace the formatter and calibrate the printer. See Calibrate now.
熱門圖文資料