hp t610 t1100繪圖儀錯誤代碼速查手冊
錯誤代碼 故障描述
01.0:YZ HCI queue does not end after 2 seconds.
01.1:YZ NVM backup: not found, read, write or read back error.
01.2:YZ Print Mech PCA fault or NVM backup failure.
01.3:YZ Problem with the PrintMech PCA.
02.1:YZ Encoder seems to be wrong.
02.2:YZ Problem with the Carriage PCA.
03:YZ Problem with Power Supply Unit.
05.1:YZ CPU Fan is stopped or burnt.
05:2:YZ Main memory size failure.
06.1:YZ Main NVM failure - not detected, read/write failed or readback error.
06.2:YZ NVM main: not detected, read, write or read back error (HDD error).
06.3:YZ NVM main: not found, read, write or read back error (HDD error).
07.1:YZ Fan PSU driver burnt.
08:11 Problem with the Front Panel.
11:11 Trailing Cable does not seem to be detected.
12.n:YZ Carriage & PCA Main doesn’t detect pens.
13.1:YZ The ISS cable may be not properly connected or malfunctioning.
17:YZ The harness main of PCA Main to Printmech may be not properly connected
21.1:13 Service Station servo shutdown.
21.2:YZ Fail moving Service Station.
21.3:YZ Problem with the Service Station.
21.4:YZ Primer error (Primer motor: zero not found, Servo Shutdown, Servo Warm,
22.0:YZ ISS BPS0 error.(Supplies 0, 1, 2).
22.1:YZ ISS BPS1 error.(Supplies 3, 4, 5).
24:YZ Ink Setup failure( Ink Delivery System (IDS) Tubes purge failed).
26.1:YZ Order of Ink Supplies incorrect.
26.2:YZ A wrong Ink Cartridge has been detected.
27:YZ An error has occurred in Printhead detection.
41:YZ Electrical fault or current limit in Media-Axis Motor..
42:YZ Electrical fault or current limit in Scan-Axis Motor..
44:YZ Fan Electrical fault, or not connected..
45:YZ An error with the Rewinder System has been detected.
48:YZ PPS system failure.
51:YZ Window Sensor failure.
52:YZ The printer has detected a faulty pare in Drop Detector (DDP)..
52.1:YZ Failure to switch ON Drop Detector (DDP)..
52.2:YZ Failure to switch OFF Drop Detector (DDP)..
53:YZ An error with the Main Media Sensor has been detected.
54:YZ An error with the Pinch Lever sensor has been detected.
55:YZ Problem with the Line Sensor. The printer has detected a failure to access
56:YZ Problem with the Line Sensor. The printer has detected a failure to access
56:YZ Drive roller analog encoder sensor fail or calibration failed.
58:YZ The Line Sensor of the printer is not functioning correctly. Either the Line
61:YZ The file format is incorrect and the Printer cannot process the job.
63:YZ Input/Output problem through the Network Card.
64:YZ Input/Output problem through the USB Port.
65:YZ Memory Driver Internal I/O error, I/O Socket Manager Internal I/O error.
66:YZ Cannot print file on current paper type. The paper type has changed since
67:YZ Input/Output problem through a Firewire Port.
71:YZ Out of memory failure.
71:19 Default Serial Number found in the main and backup NVM. It seems that
72:YZ Generic Firmware error.
73:YZ Servo Error.
74:YZ Failed getting Part Number/Serial Number.
75.2:YZ Preventive Maintenance Kit #2 counter active (Left Spitoon foams and
79:04 Generic Firmware error.
81:YZ Paper servo shutdown.
85:YZ Problem finding the Drive Roller zero.
86:01 Possible Paper Jam.
87:YZ Problem finding the Scan-axis encoder reading.
94:YZ Color calibration Error.
94.1:YZ Profiling algorithm failed.
95:YZ The Calibration of the Paper advance doesn’t activate.
97:YZ The Calibration of the Paper advance doesn’t activate.

手機用戶121.56.*.* 發(fā)表于 2023-5-5  75.2:YZ Preventive Maintenance Kit #2 counter