惠普T790錯誤代碼01.0:10
更新時間：2025/2/1 12:56:01,view:734惠普打印機T790蘇州惠普打印機售后服務中心客服熱線69616769，蘇州惠普售后電話，惠普售后網點，
Cause: Main PCA hardware failure
Replace the Main PCA
01.1:10
Cause: PrintMech PCA hardware failure
Solution: Try the following:
● Turn the power off at the rear of the printer and disconnect the power cord. Reconnect the power cord and turn on the printer.
01.2:10
Cause: ISS Top PCA communication failure
Solution: Try the following:
● Turn the power off at the rear of the printer and disconnect the power cord. Reconnect the power cord and turn on the printer.
● Replace the Ink Supply Tubes and Trailing Cable.
NOTE: If the Ink Supply Tubes are to be replaced, the Ink Cartridges need to be checked beforehand to see if they are capable of purging the new tubes. If they are not, new Ink Cartridges must also be sent with the parts to be replaced. To check the Ink Cartridges。
熱門圖文