打印機老出現請求維修CA00是什么原因
更新時間：2024/11/22 18:50:18,view:296東芝CA00蘇州東芝打印機售后服務中心客服熱線69616769，蘇州東芝售后電話，東芝售后網點， 東芝AC2000打印機，報CA00, 東芝2020請求維修ca00, 東芝2000ac請求維修CA00, 東芝打印機ca00怎么維修, 東芝2000復印機報CA00,維修視頻
打印機老出現請求維修CA00是什么原因 
東芝2501c蘇州售后維修服務電話696l6769 dsfdsasf 2018/9/18 16:07:48 東芝打印機老是出現請求維修 CA00 是什么意思
東芝2501c蘇州售后維修服務電話696l6769 何爻妙 2018/9/19 21:55:22 [CA00] Color registration abnormality
Image formation Issue, Could be any Color , Drum , Developer or more.
When you check the printing status to find out that the color printing ratio is less than 5%, color toner
low density might be the cause.
Turn the code 08-2692 “Prevention of color toner low density / ON/OFF setting” to ON, and then set
number of sheets to be judged at the code 08-2693 “Prevention of color toner low density / Judged
number of sheets setting”.
If the color printing ratio is 5% or more, check the following.
1.Check if there is any abnormality on the hand grips and rods of the main charger cleaner. Correct if
there is.
2.Check if the drum is rotated properly by turning the coupling of the developer unit. Correct the auger
and the surrounding hardware if not.
3.Check if the connectors CN337, CN346 and CN358 of the LGC board are disconnected from the
laser optical unit or the harnesses are open circuited.
4.Check if there is any stain or scratch on the glass surface of the laser optical unit. Clean or correct if
there is.
5.Check if there is any stain on the image quality sensor and Image position aligning sensors.
6.Check if the sensor shutter is working properly.
東芝2501c蘇州售后維修服務電話696l6769 dsfdsasf 2018/9/18 16:07:48 東芝打印機老是出現請求維修 CA00 是什么意思 東芝2501c蘇州售后維修服務電話696l6769 何爻妙 2018/9/19 21:55:22 [CA00] Color registration abnormalityImage formation Issue, Could be any Color , Drum , Developer or more.
When you check the printing status to find out that the color printing ratio is less than 5%, color toner
low density might be the cause.
Turn the code 08-2692 “Prevention of color toner low density / ON/OFF setting” to ON, and then set
number of sheets to be judged at the code 08-2693 “Prevention of color toner low density / Judged
number of sheets setting”.
If the color printing ratio is 5% or more, check the following.
1.Check if there is any abnormality on the hand grips and rods of the main charger cleaner. Correct if
there is.
2.Check if the drum is rotated properly by turning the coupling of the developer unit. Correct the auger
and the surrounding hardware if not.
3.Check if the connectors CN337, CN346 and CN358 of the LGC board are disconnected from the
laser optical unit or the harnesses are open circuited.
4.Check if there is any stain or scratch on the glass surface of the laser optical unit. Clean or correct if
there is.
5.Check if there is any stain on the image quality sensor and Image position aligning sensors.
6.Check if the sensor shutter is working properly.
熱門圖文