惠普5200lx打印機(jī)提示49..ff09
惠普5200lx打印機(jī)提示49..ff09 ，，tried to upgrade firmware
49.xxx errors are typically caused by a corrupt print job stuck in the print queue. Fastest way to test for this:
1. Turn off printer.
2. Unplug data cable (USB/Network) from printer.
3. Turn printer on. Is there a 49.xxx error, o r does the printer boot to a ready state? If it boots to a ready state, print an internal print (Config Report, etc...) If it prints that with no issue, then plug the data cable back into the printer , see if the 49.xxx error returns. If the 49.xxx error returns after all that, then it's a job that is corrupt. Go clear the print queue for every printer ， print server for that printer.
Note: If you get a 49.xxx error with the data cable UNPLUGGED, then the formatter is likely the issue ， will need to be replaced.
蘇州惠普5200lx售后維修電話696l6769，維修，售后服務(wù)
49.xxx errors are typically caused by a corrupt print job stuck in the print queue. Fastest way to test for this:
1. Turn off printer.
2. Unplug data cable (USB/Network) from printer.
3. Turn printer on. Is there a 49.xxx error, o r does the printer boot to a ready state? If it boots to a ready state, print an internal print (Config Report, etc...) If it prints that with no issue, then plug the data cable back into the printer , see if the 49.xxx error returns. If the 49.xxx error returns after all that, then it's a job that is corrupt. Go clear the print queue for every printer ， print server for that printer.
Note: If you get a 49.xxx error with the data cable UNPLUGGED, then the formatter is likely the issue ， will need to be replaced.
蘇州惠普5200lx售后維修電話696l6769，維修，售后服務(wù)
熱門圖文