施樂7550彩機出現010-321是怎么回事
更新時間：2024/10/3 20:36:09,view:92施樂打印機7550蘇州施樂打印機售后服務中心客服熱線69616769，蘇州施樂售后電話，施樂售后網點，
施樂7550彩機出現010-321是怎么回事
施樂7550不通電 手機用戶110.15.*.* 2020-10-30 -321 Fusing Unit Nip Fail 定影錯誤
Bsd-on:CH10.1
Nip or Release operation error of the Fusing Unit was detected.
This Fail is a Sub System failure and its occurrence cuts off the 24VDC_C13. (Refer to BSD CH1.7)
Cause/Action
Check the following:
The Fusing Unit Nip Sensor (DC330 [010-203]) for operation failure. (PL 7.6)
The Sensor Actuator for damage. (PL 7.6)
The Gear of retract mechanism for wear and damage.
The One Way Clutch for skidding.
The Drawer Connector ( DP612/ DJ612) for poor contact.
If no problem is found, replace the MCU PWB. (PL 18.2) 施樂彩色復印機出代碼010-321怎么辦
施樂7550不通電 手機用戶110.15.*.* 2020-10-30 -321 Fusing Unit Nip Fail 定影錯誤Bsd-on:CH10.1
Nip or Release operation error of the Fusing Unit was detected.
This Fail is a Sub System failure and its occurrence cuts off the 24VDC_C13. (Refer to BSD CH1.7)
Cause/Action
Check the following:
The Fusing Unit Nip Sensor (DC330 [010-203]) for operation failure. (PL 7.6)
The Sensor Actuator for damage. (PL 7.6)
The Gear of retract mechanism for wear and damage.
The One Way Clutch for skidding.
The Drawer Connector ( DP612/ DJ612) for poor contact.
If no problem is found, replace the MCU PWB. (PL 18.2) 施樂彩色復印機出代碼010-321怎么辦
熱門圖文