東芝打印機出現請求維修C414怎么處理
更新時間：2024/10/22 7:48:53,view:391東芝C414蘇州東芝打印機售后服務中心客服熱線69616769，蘇州東芝售后電話，東芝售后網點， 東芝2006打印機顯示c414, 東芝復印機2803出c414, 東芝2505報C414如何解決、, 復印機東芝DP-2006出現請求維修C414是怎么回事, 東芝2303跳C414,維修視頻
Code C414
Description Fuser unit related service call. Thermistor abnormality during warming up or in ready status after abnormality judgment.
Causes MAIN board Thermistors Heater lamp
Remedy
1 Check the power voltage Check if the power voltage is normal. (Is the voltage during the operation ±10% of the rated voltage?)
2 Check the each elements of error status Check the abnormal thermistors 08-4570-0: Center thermistor 08-4570-1: Side thermistor 08-4570-2: Edge thermistor 08-4570-5: Error counter
3 Check the thermistors
1. Check if the connectors are disconnected.
2. Check if the center and edge thermistors are in contact with the surface of the fuser roller properly?
3. Check if the center and edge thermistors are not deformed or dirty.
4. Check if the harnesses of the center and edge thermistors are open circuited.
上門維修電話696l6769,維修現場維修
C414定影故障，拆機檢查定影單元是否損壞,然后關機，按住08鍵打開主電源開關，輸入400，按確認鍵，按0鍵，按確認鍵，關機，開機！東芝打印機出現請求維修C414怎么處理
Description Fuser unit related service call. Thermistor abnormality during warming up or in ready status after abnormality judgment.
Causes MAIN board Thermistors Heater lamp
Remedy
1 Check the power voltage Check if the power voltage is normal. (Is the voltage during the operation ±10% of the rated voltage?)
2 Check the each elements of error status Check the abnormal thermistors 08-4570-0: Center thermistor 08-4570-1: Side thermistor 08-4570-2: Edge thermistor 08-4570-5: Error counter
3 Check the thermistors
1. Check if the connectors are disconnected.
2. Check if the center and edge thermistors are in contact with the surface of the fuser roller properly?
3. Check if the center and edge thermistors are not deformed or dirty.
4. Check if the harnesses of the center and edge thermistors are open circuited.
上門維修電話696l6769,維修現場維修
C414定影故障，拆機檢查定影單元是否損壞,然后關機，按住08鍵打開主電源開關，輸入400，按確認鍵，按0鍵，按確認鍵，關機，開機！東芝打印機出現請求維修C414怎么處理
熱門圖文