柯尼卡美能達C210顯示C2551代碼
更新時間：2025/1/30 20:04:37,view:91美能達打印機C210蘇州美能達打印機售后服務中心客服熱線69616769，蘇州美能達售后電話，美能達售后網點， 柯美c210第一張半面黑第二張就好了什么原因, 柯美C210復印機p-28, 美能達c210出現c2552, 美能達C210更換成像單元(青色)Y, 美能達c210報c0211,維修視頻
柯尼卡美能達C210顯示C2551代碼
美能達c210售后技術論壇 焉耆圖文 2018/11/2 18:34:58 KONICA MINOLTA C210 打印9張就出現C2551
美能達c210售后技術論壇 呂僦眍 2018/11/2 20:46:28 Code C2551
Description Abnormally low toner density detected cyan TCR sensor
When sampling data is determined in TC ratio calculation control, TCR sensor output is higher than a predetermined value for a predetermined number of times in a row even though there is toner in the sub hopper.
Remedy
1 Perform image troubleshooting procedure if image density is low.
2 Reinstall developing unit.
3 Reinstall toner cartridge.
4 Check the connector between developing unit-FREYB CN4, CN6, CN8, CN10 for proper connection and correct as necessary.
5 Check the connector between FREYB CN1, CN2-PRCB CN4, CN5 for proper connection and correct as necessary.
6 M6, M7 operation check PRCB CN13-12 to 5 (M6) PRCB CN13-16 to19 (M7) J-21
7 M8, M9 operation check PRCB CN12-9 to 2 (M8) PRCB CN12-13 to 6 (M9) J-10
8 If the toner empty sensor and its surroundings inside the sub hopper are dirtied with toner, clean them.
9 Change developing unit.
10 Change FREYB.
11 PRCB ICP3,4 conduction check.
12 Change PRCB.
美能達c210售后技術論壇 焉耆圖文 2018/11/2 18:34:58 KONICA MINOLTA C210 打印9張就出現C2551 美能達c210售后技術論壇 呂僦眍 2018/11/2 20:46:28 Code C2551 Description Abnormally low toner density detected cyan TCR sensor
When sampling data is determined in TC ratio calculation control, TCR sensor output is higher than a predetermined value for a predetermined number of times in a row even though there is toner in the sub hopper.
Remedy
1 Perform image troubleshooting procedure if image density is low.
2 Reinstall developing unit.
3 Reinstall toner cartridge.
4 Check the connector between developing unit-FREYB CN4, CN6, CN8, CN10 for proper connection and correct as necessary.
5 Check the connector between FREYB CN1, CN2-PRCB CN4, CN5 for proper connection and correct as necessary.
6 M6, M7 operation check PRCB CN13-12 to 5 (M6) PRCB CN13-16 to19 (M7) J-21
7 M8, M9 operation check PRCB CN12-9 to 2 (M8) PRCB CN12-13 to 6 (M9) J-10
8 If the toner empty sensor and its surroundings inside the sub hopper are dirtied with toner, clean them.
9 Change developing unit.
10 Change FREYB.
11 PRCB ICP3,4 conduction check.
12 Change PRCB.
熱門圖文