三星1666提示錯誤代碼:a3-3112
更新時間：2024/11/18 16:28:13,view:147三星打印機1666蘇州三星打印機售后服務中心客服熱線69616769，蘇州三星售后電話，三星售后網點， 三星1666進紙輪不會走, 三星m1666開機燈閃一下, 三星1666打印機驅動板檢修, 三星ml1666硒鼓漏粉, 三星1666開機兩燈閃一下就滅了,維修視頻
蘇州相成區三星維修，電話696l6769，現場維修，售后，三星蘇州維修站
Code A3-3111, A3-3112, A3-3113, A3-3114
Display
Sensor Failure: #. Turn off then on. Call for service if the problem persists.
Description
The NC sensor in the fuser unit is defective. / The sensor signal is abnormal due to adefective harness.
Remedy
1) Enter the SVC mode. Execute the sensor test to check the sensor operation. (Diagnostics > Engine Diagnostics > Engine Test Routines >) - 109-0000 : Fuser Temperature A - 109-0010 : Fuser Temperature B
2) Remove and disassemble the fuser unit.
3) Measure the resistance value of the Thermistor (1404-001453). If the measured value is out of 307KOm - 430KOm at 25C, replace the thermistor.
4) If the error persists, replace the Fuser unit (JC91-01049A(220V) / JC91-01050A (110V)).
5) If the error persists after replacing fuser unit, replace the Main board(JC92-02452A).
三星1666提示錯誤代碼:a3-3112
Code A3-3111, A3-3112, A3-3113, A3-3114
Display
Sensor Failure: #. Turn off then on. Call for service if the problem persists.
Description
The NC sensor in the fuser unit is defective. / The sensor signal is abnormal due to adefective harness.
Remedy
1) Enter the SVC mode. Execute the sensor test to check the sensor operation. (Diagnostics > Engine Diagnostics > Engine Test Routines >) - 109-0000 : Fuser Temperature A - 109-0010 : Fuser Temperature B
2) Remove and disassemble the fuser unit.
3) Measure the resistance value of the Thermistor (1404-001453). If the measured value is out of 307KOm - 430KOm at 25C, replace the thermistor.
4) If the error persists, replace the Fuser unit (JC91-01049A(220V) / JC91-01050A (110V)).
5) If the error persists after replacing fuser unit, replace the Main board(JC92-02452A).
三星1666提示錯誤代碼:a3-3112
熱門圖文