震旦復印機adc218出現c-2152
更新時間：2025/1/23 5:30:41,view:130震旦打印機adc218蘇州震旦打印機售后服務中心客服熱線69616769，蘇州震旦售后電話，震旦售后網點，
蘇州維修696l6769,維修現場維修
Code C2152
轉印帶縮回操作期間，轉印帶縮回傳感器無法在轉印
帶縮回離合器開啟后的預定時間間隔內檢測到轉印帶
是否位于其縮回位置。
轉印帶加壓操作期間，轉印帶縮回傳感器無法在轉印
帶離合器開啟后的預定時間間隔內檢測到轉印帶是否
位于其加壓位置。
Description
Transfer belt pressure welding alienation
The transfer belt retraction sensor does not detect “switch from retraction to pressure” within a given period time after transfer belt retraction clutch has stared engagement. The transfer belt retraction sensor does not detect “switch from pressure to retraction” within a given period time after transfer belt retraction clutch has stared engagement.
Remedy
1 Check the connector between M1-PRCB CN14 for proper connection and correct as necessary.
2 Check the connector of M1 for proper drive coupling and correct as necessary.
3 Check the connector between PS39-relay CN124-PRCB CN3 for proper connection and correct as necessary.
4 Check the connector between CL5-relay CN103-PRCB CN24 for proper connection and correct as necessary.
5 PS39 I/O check, sensor check PRCB CN3-15 (ON)
6 CL5 operation check PRCB CN24-4 (ON)
7 M1 operation check PRCB CN14-2 (REM) PRCB CN14-5 (LOCK) C-2 to 5
8 Change M1.
9 PRCB ICP5 conduction check.
10 Change PRCB.
震旦復印機adc218出現c-2152
Code C2152
轉印帶縮回操作期間，轉印帶縮回傳感器無法在轉印
帶縮回離合器開啟后的預定時間間隔內檢測到轉印帶
是否位于其縮回位置。
轉印帶加壓操作期間，轉印帶縮回傳感器無法在轉印
帶離合器開啟后的預定時間間隔內檢測到轉印帶是否
位于其加壓位置。
Description
Transfer belt pressure welding alienation
The transfer belt retraction sensor does not detect “switch from retraction to pressure” within a given period time after transfer belt retraction clutch has stared engagement. The transfer belt retraction sensor does not detect “switch from pressure to retraction” within a given period time after transfer belt retraction clutch has stared engagement.
Remedy
1 Check the connector between M1-PRCB CN14 for proper connection and correct as necessary.
2 Check the connector of M1 for proper drive coupling and correct as necessary.
3 Check the connector between PS39-relay CN124-PRCB CN3 for proper connection and correct as necessary.
4 Check the connector between CL5-relay CN103-PRCB CN24 for proper connection and correct as necessary.
5 PS39 I/O check, sensor check PRCB CN3-15 (ON)
6 CL5 operation check PRCB CN24-4 (ON)
7 M1 operation check PRCB CN14-2 (REM) PRCB CN14-5 (LOCK) C-2 to 5
8 Change M1.
9 PRCB ICP5 conduction check.
10 Change PRCB.
震旦復印機adc218出現c-2152
熱門圖文