施樂彩機開機出現(xiàn)116-317
更新時間：2025/2/13 22:36:39,view:208施樂打印機116-317蘇州施樂打印機售后服務中心客服熱線69616769，蘇州施樂售后電話，施樂售后網(wǎng)點，
蘇州施樂116-317售后維修電話696l6769,維修
Before replace 1Gb memory reseat all verticaly and horizontaly DIMM's from network controller board.
Then perform nvm init = press and hold the 3, the Stop, and the Power Save buttons simultaneously , power on the machine and keep the buttons pressed until the segment bar appears on display.
If , after replacing the 1GB memory, the fault remain you need to reload machine software.
hanks to all of you, I have added to your rep.
Had a dimm at the shop, installed it and preformed the nvm int and the machine came back to life. Was a little worried when the top of the control panel would not respond to touch, but after about 6 or 7 minutes it was fine. Again, thanks to you all.
施樂彩機開機出現(xiàn)116-317
Before replace 1Gb memory reseat all verticaly and horizontaly DIMM's from network controller board.
Then perform nvm init = press and hold the 3, the Stop, and the Power Save buttons simultaneously , power on the machine and keep the buttons pressed until the segment bar appears on display.
If , after replacing the 1GB memory, the fault remain you need to reload machine software.
hanks to all of you, I have added to your rep.
Had a dimm at the shop, installed it and preformed the nvm int and the machine came back to life. Was a little worried when the top of the control panel would not respond to touch, but after about 6 or 7 minutes it was fine. Again, thanks to you all.
施樂彩機開機出現(xiàn)116-317
熱門圖文