佳能9280故障代碼E00060-001

佳能打印機9280蘇州佳能打印機售后服務中心客服熱線69616769，蘇州佳能售后電話，佳能售后網點，

佳能9280故障代碼E00060-001

佳能9280技術論壇 何儕矍 2018/9/3 21:45:50 

 E00060 -001 -05 Title Primary Charging Shutter hp open error
Remedy 1. Check the position of the Primary Charging Shutter and the
Cleaning Pad.
1-A. In the case that the Primary Charging Shutter and the
Cleaning Pad fail to operate (stopped at hp at front side)
1-A-1. Check the connection of the Primary Charging Wire
Cleaning Motor (M6).
Motor side: J3017, J3060 (iR-ADV 8xxx)/J3160 (iRADV
6xxx) (relay), PCB side: J3177 (relay), J107
(Main Driver PCB (PCB2))
1-A-2. Replace the Primary Charging Wire Cleaning Motor
(M6).
1-B. In the case that the Primary Charging Shutter and the
Cleaning Pad are stopped at rear side (close operation
position)
1-B-1. Check the connection of the Primary Charging
Shutter Sensor (PS94).
Sensor side: J2029, J3089 (relay), PCB side: J3088
(relay), J114 (Main Driver PCB (PCB2))
1-B-2. Replace the Primary Charging Shutter Sensor
(PS94).
1-C. In the case that the Primary Charging Shutter and the
Cleaning Pad are stopped along the way
1-C-1. Check the loosening of screw on the Slider Pin and
abrasion of the pin. Tighten the screw or replace the
Slider Pin.
1-C-2. Replace the Primary Charging Assembly.
1-D. In the case that the Primary Charging Shutter stops at
front side and the Cleaning Pad moves to rear side
1-D-1. Check if the Shutter Mounting Plate is deformed. If
so, replace the Shutter Unit.
1-D-2. Check the loosening of screw on the Slider Pin and
abrasion of the pin. Tighten the screw or replace the
Slider Pin.
1-D-3. Replace the Primary Charging Assembly.
2. Replace the Main Driver PCB (PCB2).
3. Replace the DC Controller PCB (PCB1).
Description The Primary Charging Shutter Sensor (PS94) detects that the
shutter is opened although it is moved to the close position.

佳能9280技術論壇 發給 2018/9/3 16:30:07 

 佳能9280出現00056-001是什么