hp5200出現49.FF04serviceerrod
更新時間：2024/9/15 3:51:15,view:108hp打印機hp5200蘇州hp打印機售后服務中心客服熱線69616769，蘇州hp售后電話，hp售后網點，
hp5200出現49.FF04serviceerrod，，tried to upgrade firmware
49.xxx errors are typically caused by a corrupt print job stuck in the print queue. Fastest way to test for this:
1. Turn off printer.
2. Unplug data cable (USB/Network) from printer.
3. Turn printer on. Is there a 49.xxx error, o r does the printer boot to a ready state? If it boots to a ready state, print an internal print (Config Report, etc...) If it prints that with no issue, then plug the data cable back into the printer , see if the 49.xxx error returns. If the 49.xxx error returns after all that, then it's a job that is corrupt. Go clear the print queue for every printer ， print server for that printer.
Note: If you get a 49.xxx error with the data cable UNPLUGGED, then the formatter is likely the issue ， will need to be replaced.
蘇州hp報修電話696l6769，維修，售后服務
49.xxx errors are typically caused by a corrupt print job stuck in the print queue. Fastest way to test for this:
1. Turn off printer.
2. Unplug data cable (USB/Network) from printer.
3. Turn printer on. Is there a 49.xxx error, o r does the printer boot to a ready state? If it boots to a ready state, print an internal print (Config Report, etc...) If it prints that with no issue, then plug the data cable back into the printer , see if the 49.xxx error returns. If the 49.xxx error returns after all that, then it's a job that is corrupt. Go clear the print queue for every printer ， print server for that printer.
Note: If you get a 49.xxx error with the data cable UNPLUGGED, then the formatter is likely the issue ， will need to be replaced.
蘇州hp報修電話696l6769，維修，售后服務
熱門圖文