佳能6075報錯E000066-0002是什么原因

佳能打印機6075蘇州佳能打印機售后服務中心客服熱線69616769，蘇州佳能售后電話，佳能售后網點， 佳能6075打印機維修, 佳能ADV6075多功能紙盤不搓紙, 佳能6075代碼E000808-0007, 佳能6075E000733-000,維修視頻

佳能6075報錯E000066-0002是什么原因

  佳能6075錯誤提示 手機用戶180.12.*.* 2020-3-9

  8004

  佳能6075跳代碼 手機用戶180.12.*.* 2020-3-9

  8004

  佳能6075打印臟 衛虐辨 2020-3-9

  有完整代碼嗎，這個代碼查不到

  佳能6075相城區維修點 HH326220 2021/11/19 蘇州佳能6075售后維修服務中心地址查詢

 Code: E066-0002
Description:
Pre-transfer Charging Shutter hp close error.
The Pre-transfer Charging Shutter Sensor (PS95) detects that the shutter is closed although it is moved to the open position.
Remedy:
1. Check the position of the Pre-transfer Charging Shutter. 1-A. In the case that the Pre-transfer Charging Shutter fails to operate (stopped at hp at front side) Check the connection of the Pre-transfer Charging Wire Cleaning Motor (M7). Sensor side: J3108, J3089 (relay), PCB side: J3088 (relay), J114 (Main Driver PCB (PCB2)) 1-B. In the case that the Pre-transfer Charging Shutter is stopped at rear side (close operation position) 1-B-1. Check that the Primary Fan Duct is closed. Close the Primary Fan Duct. 1-B-2. Check movement of the pin to push the Pre-transfer Charging Shutter Sensor (PS95). Replace the Pin. 1-B-3. Check movement of the flag on the Pre-transfer Charging Shutter Sensor (PS95). Replace the flag/ spring. 1-B-4. Check the connection of the Pre-transfer Charging Shutter Sensor (PS95). Sensor side: J2114, J3215 (relay), J3067 (relay) PCB side: J3066 (relay), J130 (Main Driver PCB (PCB2)) 1-C. In the case that the Pre-transfer Charging Shutter is stopped along the way 1-C-1. Check abrasion of the Slider Pin. Replace the Slider Pin. 1-C-2. Replace the Pre-transfer Charging Assembly. 2. Replace the DC Controller PCB (PCB1).