惠普6200Z報錯24：10
更新時間：2024/10/3 15:47:31,view:138惠普打印機6200Z蘇州惠普打印機售后服務中心客服熱線69616769，蘇州惠普售后電話，惠普售后網點，
惠普6200Z報錯24：10
技術 王俊哥 發表于 2023/4/22 24：10 原因： 空氣增壓系統故障；無法加壓或減壓。 解決辦法： ●關閉打印機電源后，斷開電源線。重新連接電源線并打開打印機。 ●檢查電纜有沒有損壞并正確地連接到printmech PCA。 ●檢查進氣管連接正確，里面有沒有墨水，如果進氣管里有墨水，那么請拔下氣管然后清理里面殘余墨水，安裝回去System Error: 24:YZ
Problem
Description:
Ink Setup failure( Ink Delivery System (IDS) Tubes purge failed).
Corrective Action: Try the following:
Switch the Power OFF from the back of the Printer and disconnect the
Power cord. Reconnect the power cord and power On the Printer.
Try purging the Ink Supply Tubes again once the Printer has been
restarted.
Install new Cartridges in the printer and try purging the Ink Supply Tubes
again.
Problem
Description:
Ink Setup failure( Ink Delivery System (IDS) Tubes purge failed).
Corrective Action: Try the following:
Switch the Power OFF from the back of the Printer and disconnect the
Power cord. Reconnect the power cord and power On the Printer.
Try purging the Ink Supply Tubes again once the Printer has been
restarted.
Install new Cartridges in the printer and try purging the Ink Supply Tubes
again.
熱門圖文