hp LaserJet M1319 MFP常見故障代碼描述,英文手冊
更新時間:2024/10/23 1:57:38,view:114hp打印機HPLaserJetM1319MFP蘇州hp打印機售后服務中心客服熱線69616769,蘇州hp售后電話,hp售后網點,
Display:
Scanner error #
Description:
The product has experienced an error in the scanner sub-assembly area.
Remedy:
Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the product to initialize. If a surge protector is being used, remove it. Plug the product directly into the wall socket. Use the power switch to turn the product on.
Code: 49
Display:
49 Error
Description:
The product has experienced an internal embedded software error.
Remedy:
Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the product to initialize.
Code: 50.x
Display:
50.x Fuser Error
Description:
The product has experienced an internal hardware error.
Remedy:
1. Turn off the power by using the power switch, and then wait at least 30 seconds. 2. If a surge protector is being used, remove it. Plug the product directly into the wall socket. 3. Turn on the power and wait for the product to initialize.
Code: 52
Display:
52 Scanner Error
Description:
The product has experienced an internal hardware error.
Remedy:
Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the product to initialize. If a surge protector is being used, remove it. Plug the product directly into the wall socket. Use the power switch to turn the product on.
Code: 55.4
Display:
55.4 Error
Description:
The product has experienced an engine communication timeout error.
Remedy:
Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the product to initialize. If a surge protector is being used, remove it. Plug the product directly into the wall socket. Use the power switch to turn the product on.
Code: 79
Display:
79 Error
Description:
The product has experienced an internal firmware error.
Remedy:
Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the product to initialize. If a surge protector is being used, remove it. Plug the product directly into the wall socket. Use the power switch to turn the product on.
熱門圖文