hp LaserJet P1505常見故障代碼描述,英文手冊
更新時間：2024/11/21 19:31:29,view:118hp打印機HPLaserJetP1505蘇州hp打印機售后服務中心客服熱線69616769，蘇州hp售后電話，hp售后網點，
Code: 01
Display:
OFF
Blinking
Blinking
Blinking
Description:
Initialization/Startup
While in the Startup state, the Go, Ready, and Attention lights cycle (at the rate of 500 ms) one after another
Remedy:
During the Initialization and Job Cancel processes, pressing buttons has no effect.
Code: 02
Display:
OFF
OFF
OFF
OFF
Description:
Blank Display
Remedy:
Verify the formatter connection to the Engine Controller PCA is seatted and secure (J531).
Code: 03
Display:
OFF
OFF
ON
OFF
Description:
Ready
The device is ready with no job activity.
Remedy:
To print a Configuration page, press and release the Go button.
Code: 04
Display:
OFF
OFF
Blinking
OFF
Description:
Processing Data
The device is processing or receiving data.
Remedy:
To cancel the current job, press the Cancel button.
Code: 05
Display:
OFF
Blinking
ON
OFF
Description:
Manual Feed or Continuable Error
This state occurs in the following circumstances:
- Manual feed
- General continuable error
Remedy:
To recover from the error and print the available data, press the Go button.
If the recovery is successful, the device continues to the Processing Data state and completes the job.
If the recovery is unsuccessful, the device continues to the Continuable Error state. Try removing any media from the media path and cycling the device power.
Code: 06
Display:
OFF
Blinking
OFF
OFF
Description:
Attention
- Print-cartridge door is open
- Paper jam
- Paper out
Remedy:
Close the print-cartridge door, remove the paper jam, install the cartridge, or add paper.
Code: 07
Display:
OFF
ON
ON
ON
Description:
Fatal Error
The device has encountered a nonrecoverable error.
Remedy:
Turn off the device, wait 10 seconds, and turn on the device.
- Verify that all connectors to the Engine Controller PCB are securely seated.
- Verify that the motor rotates for approximately six seconds during power up.
- If the motor does not rotate during power up, check all motor drive PCB connections.
- If the motor only rotates for approximately three seconds, check the laser/scanner unit connections.
- If the motor runs for 30 or more seconds during power up, verify all connections in the fusing assembly circuitry are connected correctly.
Code: 08
Display:
ON
OFF
ON
OFF
Description:
Toner Low
The Go, Ready, and Attention lights act independently of the Toner Low state (hp LaserJet P1500 Series only).
Remedy:
Order a new print cartridge and have it ready.
Code: 09
Display:
Blinking
OFF
OFF
OFF
Description:
Toner Missing
The print cartridge has been removed from the device (hp LaserJet P1500 Series only).
Remedy:
Reinsert the print cartridge in the device.
Display:
OFF
Blinking
Blinking
Blinking
Description:
Initialization/Startup
While in the Startup state, the Go, Ready, and Attention lights cycle (at the rate of 500 ms) one after another
Remedy:
During the Initialization and Job Cancel processes, pressing buttons has no effect.
Code: 02
Display:
OFF
OFF
OFF
OFF
Description:
Blank Display
Remedy:
Verify the formatter connection to the Engine Controller PCA is seatted and secure (J531).
Code: 03
Display:
OFF
OFF
ON
OFF
Description:
Ready
The device is ready with no job activity.
Remedy:
To print a Configuration page, press and release the Go button.
Code: 04
Display:
OFF
OFF
Blinking
OFF
Description:
Processing Data
The device is processing or receiving data.
Remedy:
To cancel the current job, press the Cancel button.
Code: 05
Display:
OFF
Blinking
ON
OFF
Description:
Manual Feed or Continuable Error
This state occurs in the following circumstances:
- Manual feed
- General continuable error
Remedy:
To recover from the error and print the available data, press the Go button.
If the recovery is successful, the device continues to the Processing Data state and completes the job.
If the recovery is unsuccessful, the device continues to the Continuable Error state. Try removing any media from the media path and cycling the device power.
Code: 06
Display:
OFF
Blinking
OFF
OFF
Description:
Attention
- Print-cartridge door is open
- Paper jam
- Paper out
Remedy:
Close the print-cartridge door, remove the paper jam, install the cartridge, or add paper.
Code: 07
Display:
OFF
ON
ON
ON
Description:
Fatal Error
The device has encountered a nonrecoverable error.
Remedy:
Turn off the device, wait 10 seconds, and turn on the device.
- Verify that all connectors to the Engine Controller PCB are securely seated.
- Verify that the motor rotates for approximately six seconds during power up.
- If the motor does not rotate during power up, check all motor drive PCB connections.
- If the motor only rotates for approximately three seconds, check the laser/scanner unit connections.
- If the motor runs for 30 or more seconds during power up, verify all connections in the fusing assembly circuitry are connected correctly.
Code: 08
Display:
ON
OFF
ON
OFF
Description:
Toner Low
The Go, Ready, and Attention lights act independently of the Toner Low state (hp LaserJet P1500 Series only).
Remedy:
Order a new print cartridge and have it ready.
Code: 09
Display:
Blinking
OFF
OFF
OFF
Description:
Toner Missing
The print cartridge has been removed from the device (hp LaserJet P1500 Series only).
Remedy:
Reinsert the print cartridge in the device.
熱門圖文