京瓷1800開機提示維修呼叫C2010
更新時間：2025/1/24 8:38:44,view:357京瓷打印機1800蘇州京瓷打印機售后服務中心客服熱線69616769，蘇州京瓷售后電話，京瓷售后網(wǎng)點， KyoceraTAS1800打印機打印不工作, 京瓷1800更換粉盒后是不是一定好換芯片, 京瓷1800復印機墨盒京更換新的后, 京瓷1800傳感器在哪里, 京瓷1800數(shù)碼復合機換了粉盒總是打打停停,維修視頻
· C2010主電機啟動錯誤。。。
· 京瓷的機器維修呼叫C2010
Code C2010
DescriptionMain drive motor starting error No FG (Frequency generation) pulse is entered within the predetermined period since ASIC (U8) on the engine controller PCB has issued a motor activation signal to the main drive motor.
Causes
Defective engine controller PCB. Defective main drive motor. Excessive torque for driving drum unit or primary transfer unit. (Overloaded by a damaged gear.) Defective harness between engine controller PCB and main drive motor, or poor contact of the connector terminals.
Remedy
Replace the engine controller PCB and check for correct operation. Replace the main drive motor. Check if the drum unit or primary transfer unit rotates smoothly. Check for broken gears. Replace if any. Check the continuity of the harness and the insertion of connectors.
熱門圖文