美能達1060/2060/3070報錯代碼C-3105，C3105解決方法
更新時間：2024/10/9 1:42:09,view:121美能達打印機蘇州美能達打印機售后服務中心客服熱線69616769，蘇州美能達售后電話，美能達售后網點， 美能達501出現2801, 美能達163換載體后報cof32, 美能達195出現0211, 美能達bizhub7718打印機維修召喚m2, 美能達c210復印機成像單元,維修視頻
美能達1060/2060/3070報錯代碼C-3105，C3105解決方法
Cause
Error in fuser swing arm function
Resolution
First thing to do is to restart machine by powering off main switch leaving for a minute to sit and restart. Machine reinitialisation may clear this error and you can work away
If a machine reboot does not stop error from reoccurring, restart machine in service mode
(Open the foot door, power off the main switch, hold down the "Utility/Counter" key on the keypad, power on and keep holding the key until the machine boots up in service mode, close the front door)
Then
Select Option 3 , (System Setting )
Select Option 1 , (Software DIPSW )
using arrows change the left most number to 36
using arrows change middle number to 1
select the right most setting to OFF
Exit out of this section and keep exiting/closing out of service mode and machine will restart and warm up again. 蘇州美能達打印機維修站電話696l6769，企業一站式服務，，耗材配送
Cause
Error in fuser swing arm function
Resolution
First thing to do is to restart machine by powering off main switch leaving for a minute to sit and restart. Machine reinitialisation may clear this error and you can work away
If a machine reboot does not stop error from reoccurring, restart machine in service mode
(Open the foot door, power off the main switch, hold down the "Utility/Counter" key on the keypad, power on and keep holding the key until the machine boots up in service mode, close the front door)
Then
Select Option 3 , (System Setting )
Select Option 1 , (Software DIPSW )
using arrows change the left most number to 36
using arrows change middle number to 1
select the right most setting to OFF
Exit out of this section and keep exiting/closing out of service mode and machine will restart and warm up again. 蘇州美能達打印機維修站電話696l6769，企業一站式服務，，耗材配送
熱門圖文