美能達1060/2060/3070報錯代碼C-4641，C4641解決方法
更新時間：2024/10/31 20:06:50,view:167美能達打印機蘇州美能達打印機售后服務中心客服熱線69616769，蘇州美能達售后電話，美能達售后網點，
美能達1060/2060/3070報錯代碼C-4641，C4641解決方法
Cause
Colour regustration sensor (C-4641 - Yellow, C-4642 Magenta, C-4643 - Cyan, C-4644 Black)
Resolution
####
( On the 1060 and above please make sure toner reduction on the paper tray is turned off)
1 Power the machine OFF from the main switch leaving the sub switch ON.
2 Turn main power switch ON while pressing the Utility/Counter key. Keep holding it till the comes up in Service mode.
3 Press 02 Process Adjustment
4 Press 02 Drum Peculiarity
5 Select the Toner Densit Revert, if the readings are very high on any of the colours perform as below for that colour
6 Select 02 and run the Gamma Automatic Adjustment, a message "Completed" will appear in the top left when finished.
7 Exit Service mode to return to normal operation 蘇州美能達打印機維修站電話696l6769，企業一站式服務，上門維修，耗材配送
Cause
Colour regustration sensor (C-4641 - Yellow, C-4642 Magenta, C-4643 - Cyan, C-4644 Black)
Resolution
####
( On the 1060 and above please make sure toner reduction on the paper tray is turned off)
1 Power the machine OFF from the main switch leaving the sub switch ON.
2 Turn main power switch ON while pressing the Utility/Counter key. Keep holding it till the comes up in Service mode.
3 Press 02 Process Adjustment
4 Press 02 Drum Peculiarity
5 Select the Toner Densit Revert, if the readings are very high on any of the colours perform as below for that colour
6 Select 02 and run the Gamma Automatic Adjustment, a message "Completed" will appear in the top left when finished.
7 Exit Service mode to return to normal operation 蘇州美能達打印機維修站電話696l6769，企業一站式服務，上門維修，耗材配送
熱門圖文