HP1319紙出來有4cm左右就卡紙,剛換的定影膜,是咋回事
hp1319紙出來有4cm左右就卡紙,剛換的定影膜,是咋回事
定影缺油了
現在我換了一個定影組件還是一樣打的紙出來就卡住
先清潔搓紙輪，再重點去查看出紙傳感器
字沒有被拉長我直接換的定影組件
離合有沒有弄過
離合器的問題很好判斷，打印的時候聽下是不是會連續進紙，有聽到聲音就是離合器，單張卡在定影出口就要重點去查看傳感器，和紙張類型
傳感器的問題，仔細看看
加熱組件一換就好了
最后修好了故障是出紙傳感器的插頭來回拔插虛焊了最后重新補焊就好了
蘇州HP1319售后維修電話696l6769，企業一站式服務，上門維修，耗材配送
hp1319復印右側不清楚
hp1319一體機打印正常，復印右側不清楚本來以為hp1319一體機打印正常，復印右側不清楚可以輕松搞定！哪知掃描頭換了，激光器清潔了還是搞不定，故障依舊！
1、你換過新的硒鼓試過了嗎？
2、換鼓組件試了，不行
3、你先看看打印清除不。在排除問題嘛，實在不行就調下激光器就可以了呀
4、搞好了，是修理機器時，把激光頭擦很了，給擦出了痕跡，換了新的就正常了。
1、你換過新的硒鼓試過了嗎？
2、換鼓組件試了，不行
3、你先看看打印清除不。在排除問題嘛，實在不行就調下激光器就可以了呀
4、搞好了，是修理機器時，把激光頭擦很了，給擦出了痕跡，換了新的就正常了。
hp1319只能發傳真不能收傳真
復印、掃描、發傳真都好，傳真板也換了，就是不能收傳真？電話線路也是好的，收傳真時能顯示正在接收數據，最后提示未檢測到傳真信號，收不到傳真，急死了，請問各位大俠是什么原因？
1、換一條線路試一試，大部分只能收不能發或者只能發不能收都是通信運營商問題，曾經遇到過一起運營商服務死活不愿意派人解決的，最后威脅工信部投訴才派人來解決，最終告訴我結果是電信施工機房的問題。
2、我這也是這問題，換了主板和傳真版也不行
1、換一條線路試一試，大部分只能收不能發或者只能發不能收都是通信運營商問題，曾經遇到過一起運營商服務死活不愿意派人解決的，最后威脅工信部投訴才派人來解決，最終告訴我結果是電信施工機房的問題。
2、我這也是這問題，換了主板和傳真版也不行
hp1319打印機初始化方法
蘇州吳中區hp，hp蘇州維修站
：關機->按住“取消”和“向右”按鈕->開機
hp1005初始化方法
菜單 --右鍵--ok--ok 蘇州
：關機->按住“取消”和“向右”按鈕->開機
hp1005初始化方法
菜單 --右鍵--ok--ok 蘇州
HP LaserJet M1319 MFP常見故障代碼描述,英文手冊
Code: -
Display:
Scanner error #
Description:
The product has experienced an error in the scanner sub-assembly area.
Remedy:
Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the product to initialize. If a surge protector is being used, remove it. Plug the product directly into the wall socket. Use the power switch to turn the product on.
Code: 49
Display:
49 Error
Description:
The product has experienced an internal embedded software error.
Remedy:
Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the product to initialize.
Code: 50.x
Display:
50.x Fuser Error
Description:
The product has experienced an internal hardware error.
Remedy:
1. Turn off the power by using the power switch, and then wait at least 30 seconds. 2. If a surge protector is being used, remove it. Plug the product directly into the wall socket. 3. Turn on the power and wait for the product to initialize.
Code: 52
Display:
52 Scanner Error
Description:
The product has experienced an internal hardware error.
Remedy:
Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the product to initialize. If a surge protector is being used, remove it. Plug the product directly into the wall socket. Use the power switch to turn the product on.
Code: 55.4
Display:
55.4 Error
Description:
The product has experienced an engine communication timeout error.
Remedy:
Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the product to initialize. If a surge protector is being used, remove it. Plug the product directly into the wall socket. Use the power switch to turn the product on.
Code: 79
Display:
79 Error
Description:
The product has experienced an internal firmware error.
Remedy:
Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the product to initialize. If a surge protector is being used, remove it. Plug the product directly into the wall socket. Use the power switch to turn the product on.
Display:
Scanner error #
Description:
The product has experienced an error in the scanner sub-assembly area.
Remedy:
Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the product to initialize. If a surge protector is being used, remove it. Plug the product directly into the wall socket. Use the power switch to turn the product on.
Code: 49
Display:
49 Error
Description:
The product has experienced an internal embedded software error.
Remedy:
Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the product to initialize.
Code: 50.x
Display:
50.x Fuser Error
Description:
The product has experienced an internal hardware error.
Remedy:
1. Turn off the power by using the power switch, and then wait at least 30 seconds. 2. If a surge protector is being used, remove it. Plug the product directly into the wall socket. 3. Turn on the power and wait for the product to initialize.
Code: 52
Display:
52 Scanner Error
Description:
The product has experienced an internal hardware error.
Remedy:
Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the product to initialize. If a surge protector is being used, remove it. Plug the product directly into the wall socket. Use the power switch to turn the product on.
Code: 55.4
Display:
55.4 Error
Description:
The product has experienced an engine communication timeout error.
Remedy:
Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the product to initialize. If a surge protector is being used, remove it. Plug the product directly into the wall socket. Use the power switch to turn the product on.
Code: 79
Display:
79 Error
Description:
The product has experienced an internal firmware error.
Remedy:
Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the product to initialize. If a surge protector is being used, remove it. Plug the product directly into the wall socket. Use the power switch to turn the product on.